AccessHD DTA1050D
DTV Converter Box
(with dedicated remote control)
There is a "universal" replacement remote control for this box at
Remote Controls.com Click on Converter Box (Digital)
AccessHD DTA1050D User Manual
These compact, low cost converters enable analog TVs and “digital ready” TVs to receive off-air
UHF and VHF digital television signals. Simply attach your antenna to the back of the converter
and it will convert your local broadcast stations’ standard, enhanced, and high-definition digital
signals into an analog TV signal format. This converter connects to your television using your
choice of composite video (RCA jack) or 75 ohm RF cable.
Standard Features:
Same specs as DTA1020A but(Slightly different shade of silver)
Analog Pass Through
Larger control buttons
Channel 3/4 software selectable
Infrared remote control
V-chip parental control (version 2.0)
AC3 Dolby Digital Stereo down mixing
MPEG-1 layers 1, 2, 3 (MP3)
MPEG-2 MP@ML, MP@HL
Silver enclosure
3’ 75 ohm RF cable with F-type connectors
Sleep timer
UL, FCC, and NTIA approvals
Connectivity:
Single RF input (IEC 169-24 F-Type)
Single RF (F-Type) output with loop through
Composite video (RCA yellow connector)
Analog stereo RCA audio output (RCA white and red connectors)
Memory:
2 MB Flash
16 MB DRAM
Power Supply:
External high efficiency switch mode power supply
110V, 60HZ
Standby and sleep mode power saving feature.
Converter Dimensions:
5”W x 5”D x 1.3”H
Weight: 1.0 lbs.
Return from AccessHD DTA1050D to EZ Digital TV Home Page
Disclaimer
Help Support Our Site
|
